For any industry to work efficiently, it is vital to get the best quality machinery and the knowledge to leverage it properly. The same applies in the case of an electric wire rope hoist too. The experts must grow and explore ways to use their equipment best.
A hoist is a load-lifting device used in almost every industry to lift heavy loads. An electric wire rope hoist manufacturer uses electric motors, gearboxes, rope drums, and electric panels to design a crane with a large wire rope connected to a hook. These cranes generally handle heavy weights ranging from 500kg to 20 tons in versatile atmospheres.
Read along this blog to learn some things that will help you make the best of your wire rope hoist in the industry.
Voltage Checking
Every crane is made for different specifications and has different electric load management capabilities. Before buying your equipment from the chosen crane manufacturer in India, ensure its voltage limitations. Even the slightest change in the voltage range can affect the speed of the hoist. The speed and voltage of the hoist are directly proportional.
Test the Control Buttons
Regularly check the control buttons of your electric hoist before adding the load. Emergencies don't announce before coming. And in an emergency, malfunctioning the emergency button can lead to severe accidents. So, do not forget to check the emergency stop button by pressing and confirming the cease action.
Check the Lubrication
Proper lubrication of the crane parts is essential for efficient functioning. So always ensure that the gearboxes are filled up to the mark by the manufacturer-recommended oil in the hoist and the carriages of the crane.
Limit Switches Test
This is one of the most crucial tests experts should conduct to ensure efficiency and productivity. The primary function of the hoist is to disconnect as the hook reaches either end of its limit. Therefore check the hoist limit by pressing the up- button all the way. Once the hook reaches the limit, the button will disconnect. Now repeat the procedure with the down button.
Crane Motion Test
The crane motion test is performed to check the horizontal movements of the crane. You complete this test by taking the crane to the top till the gantry hills.
Load Test with Trail Run
After completing all the basic tests, it is now the turn to do a trial run with load. Press the down button till the hook reaches the round and disconnects. Now attach the load and press the up button to lift the load and detach the hook.
Look out for Tangles
Another thing that can hinder the crane operations and cause accidents is the tangling of the hoist rope. So ensure that the ropes are untangled for the successful operation of the crane.
Lastly, Be Safe
Always ensure that there are no people beneath the crane before operating it. Train the workers properly before letting them operate it. Also, avoid using the control buttons without any guidance.
Wrapping up
The right crane and the knowledge to leverage it can significantly impact your productivity. So, contact Ambica Engineering, a leading electric wire rope hoist manufacturer in India, to get the best equipment and exemplary technical support for the efficient growth of your industry.